1979-1993 & 94 Conv [Subscribe to Daily Digest] |
[Main C900 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Can't recall - can the overpressure valve be removed? Posted by Goblin [Email] (#2224) [Profile/Gallery] (more from Goblin) on Wed, 9 Aug 2023 18:01:02 In Reply to: Can't recall - can the overpressure valve be removed?, DET17 [Profile/Gallery] , Wed, 9 Aug 2023 04:58:57 Members do not see ads below this line. - Help Keep This Site Online - Signup |
So we found out there was blockage in the brand new evaporator and the condenser. We blew those out and it started acting normal again for a little while we added three more ounces of Ester oil and 12 oz of freon. Then we went and took it for a drive came back and the high side pressure was over 250 and the low side pressure was 70 or 80 and the temperature was 80° outside. We took the whole entire system apart flushed everything out with AC flush let everything dry and then we put everything back together I still think there is some sort of blockage in the condenser because now it is acting better but there's still something going on in the system. There was these little rubber things that they had stuffed in the orifice of the condenser I think something broke off inside of those even though I removed them and saw nothing when I installed them that's the only thing that I can think would have happened now I think the condenser still has something in it or the evaporator we're probably going to have to replace both of those the compressor is acting normal now so thank goodness it's not that $800 part.. I will post what I find out I'm probably going to just order a new condenser and evaporator and purge valve and dryer just to make sure.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.