Yes, I have both seals now going the same way, but the piston assembly seems to hang up in the bore. After putting everything back together, I put a screwdriver thu the clip that the clevis pin goes thru to attach to the clutch pedal, and push upwards into the cylinder. When I do this, I get one good push with pressure, and then the next push gets real easy because the cylinder hasn't returned to its initial position. It sort of sticks, then eventually after 20 seconds or so returns to its normal position. I was wondering if the spring is getting weak, and has difficulty returning the piston after compression. Is any of this common?. I want to make sure before re-installation that its working properly since its such a pain in the butt to keep putting it in and taking it out again.Thanks
email me off-line if you have any suggestions - randm1123 hotmail.com Thanks!
posted by 98.203.20...
Posts in this Thread:
Members can receive an alert when someone posts in this thread.
Post a Followup
This is a moderated bulletin board - Posting is a privilege, not a right.
Unsolicited commercial postings are not allowed (no Spam). Please, no For Sale or Wanted postings, SERIOUSLY.
Classifieds are to be listed in The Saab Network Classifieds pages.
This is a problem solving forum for over 250,000 Saab owners, so expect to see
problems discussed here even though our cars are generally very reliable. This is not an anything goes
type of forum. Saabnet.com has been a moderated forum since 1988. For usage guidelines, see the
Saabnet.com Mission and Purpose Page. Please remember that you are
not anonymous. Site Conact |
Your address is: 188.8.131.52 - Using CCBot/2.0 - Logged.
Site Members do not see red text instructions, green links, and bottom of the page banners.
Click here to see all
the Site Membership Benefits!