[Subscribe to Daily Digest] |
[Main Performance Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: I-WEE-TOD-DED Posted by Notnoel [Email] (#23) [Profile/Gallery] (more from Notnoel) on Tue, 20 May 2008 06:49:14 In Reply to: I-WEE-TOD-DED, pghkid, Tue, 20 May 2008 06:15:11 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Now that you've found it, there is a great site with detailed instructions for your box that I can't name here because they are a competitor to Saabnet, but the name (this is in code!!!)is "very similar to the other userID that helped you but without the space".com. I think you might be able to figure that out and I won't have violate any terms of use.
I think you have a 14-pin APC (from a table on the un-named website), any way (the warnings are his - I used one of the other mods on this page, and it rocks)
<<<To modify the APC (Older version APC, board version 1, 14 pin, grey casing)
This is only for hard-core people, and I don't recommend this. I've got a professional altered APC.
I TAKE NO RESPONSIBILITIES AT ALL...
version 1 (gives boost levels from 0.9 bar to 1.4 bar)
1. Open the APC
2. Open the circuit board.
3. Locate the R42 resistor
4. Exchange the resistor for a wire.
5. Locate the R40 resistor (600 ohm).
6. Exchange the resistor for a 1300 ohm resistor.
7. Don't touch anything else.
8. Put it all together
OR
version 2 (gives boost levels from 0.5 bar to 1.4 bar)
1. Open the APC
2. Open the circuit board.
3. Locate the R42 resistor
4. Exchange the resistor for a wire.
5. Locate the F-pot (500 ohm).
6. Exchange the F-pot for a 1000 ohm pot.
7. Locate the R40 resistor (600 ohm).
8. Exchange the resistor for a 900 ohm resistor.
9. Don't touch anything else.
10. Put it all together
To modify the APC (Older version APC, board version 2, 14 pin, black casing)
This is only for hard-core people, and I don't recommend this. I've got a professional altered APC.
I TAKE NO RESPONSIBILITIES AT ALL...
version 1 (gives boost levels from 0.9 bar to 1.4 bar)
1. Open the APC
2. Open the circuit board.
3. Locate the R42 resistor
4. Exchange the resistor for a wire.
5. Locate the R40 resistor.
6. Exchange the resistor for a 1300 ohm resistor.
7. Don't touch anything else.
8. Put it all together
OR
version 2 (gives boost levels from 0.5 bar to 1.4 bar)
1. Open the APC
2. Open the circuit board.
3. Locate the R42 resistor
4. Exchange the resistor for a wire.
5. Locate the F-pot (500 ohm).
6. Exchange the F-pot for a 1000 ohm pot.
7. Don't touch anything else.
8. Put it all together
>>>
posted by 63.139.1...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.