[Subscribe to Daily Digest] |
![]() | [Main Performance Bulletin Board | BBFAQ |
Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: APC System Fault Trouble Shooting Question Posted by Inga [Email] ![]() ![]() In Reply to: Re: APC System Fault Trouble Shooting Question, Simon S, Mon, 30 Jan 2006 16:13:05 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Ok with the pressure switch I am following the wire from the APC box to the White bulkhead connector by the fuse box on the inside of the car. I follow this same yellow/white wire to the CC pressure switch. This switch has 2 wires going to it. One in, the other out. Both are yellow/white. This same wire continues over to the APC solenoid over the Rad.
Now at the box, I read 7.47 volts. With my meter I stab the wire with one probe and ground the other to the car. By doing so I reading the voltage across the wire. Again by the box I get 7.47. On the other side of the bulkhead, in the engine by, I get a whooping 1.46. I get this anywhere in the engine bay. At the fuse box, and the pressure switch, and at the solenoid (APC). I think I may be grounding out either under my seat somewhere or at the connector itself.
Doe this make since?? Am I missing anything.
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |