1979-1993 & 94 Conv [Subscribe to Daily Digest] |
i doubt an easy out will do what you need but you can try. if the bolt broke then it is way tight. you will need to drill it out. here is what i would try. run a 1/16 bit as close to the threads as you can with out having it deflect into the aluminum. then drill out the rest at center as best you can. at that point you may be able to peel the remains away from the housing. even if you bugger up the threads you can put in a helicoil. the last thing you wand to do now is bust an eazy out. you can also try an ez out and if if does not work just progressively drill it out until you get one side all the way to the aluminum ( assuming that you will be slightly off center)
posted by 207.202.205...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |