Joe ,
The performance that you are getting from your car is what I was expecting from mine.....all except leaving the Aero in the dust. Mine for some reason or another was a rocket, ran at what I would say is beyond the high end of max spec. The boost would stay at the end of the red in every gear. It ran like that for 50k until a giant truck decided to test the cars structural integity. This is my 6th Saab, but, first to modify.
In answer to your questions, see below.
1. Cat back actually did produce a noticable increase in performance. If I can get some of the performance that I expect out of my current mods, then I will opt for the down pipe and cat sections. You can check the Abbott site for the up-grades I purchased.How do you like your JT3 unit?
2. Intake pipe. Yes...See Abbott. It is a beautiful unit. I only expect to help a little on the high end with this mod.
3. I don't know. I have done repeated adaption runs with no noticable improvement in performance.
4.HELL YES!!
5.This is something I need to do before I go any further. Thanks.
Regarding your comments on not getting full boost. That is what I am experiencing. I even had the mechanic adjust the boost up a couple of turns....resulting in nothing. If anything I had a little less boost to his amazement. So, It looks as though I need to do a full systems check. Thanks for that bit of info on the check valve.
I will get back to you.
Thanks, Dave









posted by 68.4.20...

• Pin 14 or Pin 30 for fuse 9 trick, Andy (West London), Mon, 6 Sep 2004 12:22:10
  • Thanks for the reassurance all!, Andy (West London), Thu, 9 Sep 2004 10:57:47
    • It is a Trionic..., Joe98, Thu, 9 Sep 2004 12:26:49
      • Re: It is a Trionic..., Andy (W.London), Thu, 9 Sep 2004 13:05:12
  • pre-trionic is is pin 30..., gavin, Mon, 6 Sep 2004 17:05:44
  • Pin 14, Ari , Mon, 6 Sep 2004 16:49:40
    • The trick worked in my car...., turrbo , Tue, 7 Sep 2004 05:16:54
  • Re: Pin 14 or Pin 30 for fuse 9 trick, Derek, Mon, 6 Sep 2004 16:47:23
    • Re: Pin 14 or Pin 30 for fuse 9 trick, dboone, Mon, 6 Sep 2004 20:32:13
      • dboone, pulling fuse 9 info, gavin, Mon, 6 Sep 2004 21:56:36
        • Re: dboone, pulling fuse 9 info, dboone, Tue, 7 Sep 2004 09:25:38
        • Definitely cut the wire vs. keeping Fuse 9 pulled>>>, Joe98, Tue, 7 Sep 2004 08:03:24
          • Re: Definitely cut the wire vs. keeping Fuse 9 pulled>>>, dboone, Tue, 7 Sep 2004 09:22:36
            • Some thoughts..., Joe98, Tue, 7 Sep 2004 13:31:25
              • Re: Some thoughts..., dboone, Tue, 7 Sep 2004 19:44:24
                • Something's not right..., Joe98, Wed, 8 Sep 2004 07:23:18
                  • Re: Something's not right..., dboone, Wed, 8 Sep 2004 08:54:00 <-- Viewing This Message
                    • More..., Joe98, Wed, 8 Sep 2004 11:56:44
                      • Re: More..., dboone, Wed, 8 Sep 2004 14:28:05

No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.

• Prev by Date: Heater mixer flap problem?, LeonB, Wed, 8 Sep 2004 08:47:47
• Next by Date: AMM Pin?, Todd, Wed, 8 Sep 2004 09:40:39
• Main 9000 Bulletin Board

StateOfNine.com

SaabClub.com

Jak Stoll Performance

M Car Covers

Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]

Random Saabnet.com Member Gallery Photos (Click Image)