1969-1984 [Subscribe to Daily Digest] |
[Main Saab Model 99 Bulletin Board | BBFAQ |
Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: Kevin/ Doug....another question about the condenser Posted by DougM [Email] (#211) [Profile/Gallery] (more from DougM) on Fri, 28 Mar 2008 00:45:15 In Reply to: Kevin/ Doug....another question about the condenser!!, Larry, Thu, 27 Mar 2008 17:35:41 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Something I found on the net.
"Primary current produces a magnetic field around the coil windings. This does not occur instantly, because it takes time for the current and the magnetic field to reach maximum value. The time element is determined by the resistance of the coil winding or the length of time the distributor contacts are closed. The current does not reach the maximum because the contacts remain closed for such a short time, and more so at higher engine speeds. When the breaker points begin to open, the primary current will continue to flow. This condition in a winding is increased by means of the iron core. Without an ignition condenser, the induced voltage causing this flow of current would create an arc across the contact points and the magnetic energy would be consumed in this arc. As a result, the contact points would be burned and ignition would not occur. The "condenser" prevents the arc by making a place for the current to flow. As a result of condenser action, the magnetic field produced and continued by the current flow will quickly collapse. It is the rapid cutting out of magnetic field that induces high voltage in the secondary windings. So, if the condenser should go bad, the high voltage needed to jump the gap at the spark plugs will not be possible. This could cause a no-start condition or a driving problem."
posted by 75.187.23...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.